Material Thickness
- C60-6 - 0.15mm | 0.006"
- C60-8 - 0.20mm | 0.008"
- C60-12 - 0.30mm | 0.012"
Format: Free standing phase change thermal inteface film with release liner.
Standard Cross Section
Release Liner | Thermal Pad Transfer System
When designing Ceraphase 60 (C60) to achieve excellent thermal transfer results, the thermal performance was not the only target. An additional key advantage in using Ceraphase 60 is the offering of the TIMTEL Die Cut Thermal Pad Transfer System. The purpose of this die cut design was to avoid common installation issues typically experienced by similar phase change thermal pads on the market place today such as not releasing properly from the liner and pad tearing.
C60 is delivered with a top and bottom clear release liner. The top liner is removed first to expose the top of the C60 film. Once the top liner is removed, the pad is applied to the module or application surface, slight even pressure is then applied, and the final liner with extended tab is removed.
Extended liner around perimeter of C60 pad is fully customizable with regards to clearance distance around the pad.