FASTELFILM THERMAL BONDING AND SEALING ADHESIVE FILMS
THERMAL BONDING AND SEALING ADHESIVE FILMS
High Performance Thermal Bonding Adhesive Films
FastelFilm are specially formulated non-thermoset thermal bonding adhesive films that offer a range of melt point temperatures, free standing adhesive film thicknesses as well as base adhesive chemistries.
FastelFilm is designed to adhere to a wide range of substrates and capability to be delivered custom designed pre-from outlines as well as sheets or rolls. The ability to fully customize the X, Y and Z direction of the film pad allows to support many assembly markets including medical device & diagnostic, electronics, automotive assembly, textile and other industrial type applications.
Due to its non-thermoset design and long storage shelf life, FastelFilm can be installed and heated quickly with many types of standard and custom heating types of equipment.
Pre-Form Die Cut Advantage
We know adhesive pad installation is just as important as adhesive performance. All of our FastelFilm thermal bonding adhesive and sealing films are available in a range of delivery formats that include narrow slit reels, die cut individuals, multiple die cuts per card or die cut reels.
FastelFilm Product Features and Benefits
- Uniform bond line adhesion | sealing
- Range of melt point temperatures
- Multiple film thicknesses
- Range of thermoplastic base chemistries
- Prototype and production die cuts
- Inert | no outgassing characteristics (solvent free)
- Quick and clean installation
- Formulation customization available
- Substrate coatings available (films and foils)
- Install with standard or custom heating equipment
Uniform Bond Line and Clean Approach
Due to its inherent film form, FastelFilm offers a uniform bond line approach and clean installation before and after heating. As a die cut film, FastelFilm can be dropped-in-place and heated. Dispensable adhesive systems can be messy to apply and can require significant clean-up after each installation as well as introduce pockets of trapped air and lack of uniformtiy (less strength) across the surface of the interface.
Dry vs Tacky Film Surface
FastelFilm is available in either a dry or tack film surface at room temperature configuration. The FastelFilm tack versions can be advantageous in scenarios where adhesive pad placement or substrate fixturing prior to heating is a benefit.
Inert and Environmentally Friendly
In today's world, sustainability is key. FastelFilm is an inert thermoplastic based adhesive system and contains no solvent during the manufacturing or filming. Its inert characteristic is both demonstrated before and after heating which makes FastelFilm and ideal candidate for medical device & diagnostic bonding / sealing applications
EVA Based Adhesive Films
FastelFilm 15066
Type: EVA AdhesiveMelt Point: 66CFilm Surface: Dry @ Room Temp
Film Thickness: 0.038mm to 0.76mm
FastelFilm 16071
Type: EVA Adhesive
Melt Point: 71C
Film Surface: Dry @ Room Temp
Film Thickness: 0.038mm to 0.76mm
FastelFilm 20093
Type: EVA Adhesive
Melt Point: 93C
Film Thickness: Dry @ Room Temp
Film Thickness: 0.038mm to 0.76mm
FastelFilm 230110
Type: EVA AdhesiveMelt Point: 110CFilm Surface: Dry @ Room TempFilm Thickness: 0.038mm to 0.76mm
EVA-Synthetic Rubber Adhesive Films (HPB Series)
FastelFilm HPB-600
Type: EVA / Synthetic Rubber BlendMelt Point: 66CHPB-600: Dry Film @ Room Temp
HPB-600-PT: Tacky @ Room TempFilm Thickness: 0.08mm to 0.76mm
USP Class VI Certified Adhesive
FastelFilm HPB-700
Type: EVA / Synthetic Rubber BlendMelt Point: 71CHPB-700: Dry Film @ Room TempHPB-700-PT: Tacky @ Room TempFilm Thickness: 0.08mm to 0.76mm
FastelFilm HPB-900
Type: EVA / Synthetic Rubber BlendMelt Point: 93CHPB-900: Slight tack @ Room TempHPB-900-PT: Tacky @ Room TempFilm Thickness: 0.08mm to 0.76mm
FastelFilm HPB-1100
Type: EVA / Synthetic Rubber BlendMelt Point: 110CHPB-1100: Dry Film @ Room TempHPB-1100-PT: Tacky @ Room TempFilm Thickness: 0.08mm to 0.76mm
Polyethylene Based Adhesives (PA Series)
FastelFilm PA250-LV
Type: PE Based (low viscosity)Melt Point: 120CFilm Surface: Dry
Film Thickness: 0.038mm to 0.76mm
FastelFilm PA250-HV
Type: PE Based (high viscosity)Melt Point: 120CFilm Surface: DryFilm Thickness: 0.038mm to 0.76mm
FastelFilm HPA-2500
Type: PE / Synthetic Rubber Blend
Melt Point: 120C
HPA-2500: Dry Film @ Room Temp
HPA-2500-PT: Tacky @ Room Temp
Film Thickness: 0.08mm to 0.76mm
Polyamide-Nylon Based Adhesives (PI Series)
FastelFilm PI 284
Type: PolyamideMelt Point: 140C minimumFilm Surface: Dry
Film Thickness: 0.038mm to 0.76mm
Typical Applications
Medical Device / Diagnostic / Assembly
- PCB Mounting and/or Sealing
- PCB or Component Housing
- Component Mounting
- Component Encapsulation
- Chamber Mounting or Sealing
- Catheter Assembly
- Flexible Film Bonding
- Microfluidic Layer Bonding | Sealing
- Wire Bonding | Alignment
- General or Electrical Contact Sealing
- Lens Mounting and/or Sealing
- Display Mounting and/or Sealing
- Temporary Component Fixturing
- Gasket Sealing
- General Device Assembly
- General Diagnostic Cartridge Assembly
Electronics Assembly
- PCB Mounting and/or Sealing
- PCB or Component Housing
- PCB Joint Bonding or Sealing
- Fastener Sealing
- Case Bonding and/or Sealing
- Component Mounting
- Component Encapsulation
- Membrane or Frame Sealing
- Wire Bonding | Alignment
- General or Electrical Contact Sealing
- Lens Mounting and/or Sealing
- Display Mounting | Sealing
- Temporary Component Fixturing
- Gasket Sealing
- Muti-layer Material Bonding
- General Electronics Assembly
Automotive Application / Assembly
- PCB Bonding and/or Sealing
- Fastener Contact Bonding
- Plastic or Glass Lens Bonding
- Fabric Bonding
- Membrane Switch Bonding/Sealing
- Fixture / Assembly Setup
- Frame or Gasket Sealing
Industrial and Laminations
- Plastic Film Bonding | Laminations
- Metal Foil Bonding | Laminations
- Paper Bonding
- Fabric Bonding
- Glass Bonding
- General Equipment Assembly
Request Sample or Technical Data Sheet